mdLiDAR1000HR aaS: HR means high resolution pointclouds and increased coverage is made easier and more accessible than ever. This is the UAV, hardware, software, workflow, training and support that surveying professionals need- now with convenient mdaaS plans!
mdLiDAR1000HR aaS TECHNICAL SPECS
SOLUTION COMPONENTS:
Platform
md4-1000
Payload
- LiDAR Sensor: Velodyne PUCK VLP-16
- Camera Sensor: SONY IMX264
- Georeferencing: APX-15 UAV
Software
- mdCockpit
- mdInfinity
TECHNICAL SPECIFICATIONS:
Solution Take off Weight (TOW):
6500g
System Operation Temperature:
-10 °C up to 40 °C
System Accuracy
-
LiDAR Pointcloud
- 4 cm RMSE
-
Photogrammetry:
- Horizontal: 1 – 2 pixels
- Vertical: 3 – 4 pixels
| Flight Altitude AGL (1,2) (m/ft) | 30/100 | 40/130 | 50/165 |
|---|---|---|---|
| Speed (m/s) | Covered square area at 30% sidelap (ha) | ||
| 4 | 15 | 25 | 34 |
| 6 | 25 | 34 | 50 |
| 8 | 34 | 50 | 62 |
| Speed (m/s) | Average Point Density in pts/m2 (2,3) for the square area | ||
| 4 | 428 | 282 | 212 |
| 6 | 287 | 189 | 141 |
| 8 | 216 | 144 | 107 |
| Speed (m/s) | Average Point Density in pts/m2 (2,3) for 1 line | ||
| 4 | 312 | 208 | 156 |
| 6 | 208 | 138 | 104 |
| 8 | 156 | 104 | 78 |
| GSD with 5mm lens (mm) | 20.7 | 31.1 | 41.4 |
| Swath width (m/ft) (m) | 60 | 90 | 120 |
| Number of Laser Returns | 2 | 2 | 2 |
| Precision over gravel surface along the vertical at 1-σ (cm) | 1.0 | 1.6 | 2.1 |
(1) Coverage estimated for approximately 25 minutes of flight time.
(2) Average density calculated with 30% overlap on 5 lines… average density will depend on surface type.
(3) Flight Altitude Above Ground Level (AGL)