Spreading Wings S1000+
LARGE CARRYING CAPACITY, STRONG AND STABLE
Free yourself from weight limits and fly with heavy DSLR cameras such as the 5D Mark III with the advanced eight-rotor propulsion system of the S1000+. The S1000+’s arms and landing gear are made of sturdy carbon fiber, giving remarkable stability and strength. You’re flying in a variety of flight conditions with confidence, knowing your gear is safe.
HIGHLY PORTABLE, WITH FOLDABLE ARMS
With arms that fold in to save space, the S1000+ is built to be taken wherever you need to go. Then when you want to fly, you are ready to start shooting in just a few minutes.
REMOVABLE UPPER CENTER BOARD
The upper center board can be removed, giving you access to the IMU. Additionally, there are eight positions reserved for your extra equipment. So installation of your main controller, iOSD, Lightbridge, or any other accessories is faster and easier than ever before.
This new center board structure is perfectly compatible with the DJI WKM and A2 flight controllers.
NEW POWER DISTRIBUTION SYSTEM
A redesigned, rebuilt power distribution system improves safety and reliability. Gold-plated metal bearings with a unique screw design secure the power cords, ensuring cables will not come loose during flight and allowing easy setup.
Prevent short circuits and easily plug in your power supply with the AS150 sparkproof plug.
Weighing just 4.4kg, the S1000+ has a maximum takeoff weight of 11kg. This means you can easily carry most cameras and gimbals, including your 5D Mark III. Used with a 6S 15000mAh battery, it can fly for up to 15 minutes.
WIDE RANGE OF SHOOTING ANGLES
Retractable landing gear and a low gimbal mounting bracket combine to enable a wide range of possible shooting angles and camera motions.
COMPATIBLE WITH ZENMUSE GIMBALS
Full compatibility with DJI’s entire line of Zenmuse Z15 camera gimbals, including the new Z15-5D III (HD), provides unmatched stability in flight.
REDUCED VIBRATIONS, CLEARER FOOTAGE
The S1000+’s gimbal bracket is separated from the main frame by specifically designed dampers. This significantly reduces high-frequency vibrations and makes your shots clearer and sharper.
A 40A electronic speed controller (ESC), our fastest available, is built in to each arm. The 4114 pro motors, high performance 1552 folding propellers, and V-type mixer design combine to give each arm of the S1000+ a maximum thrust of 2.5Kg.
Our latest motor adopts a single wire stator design, offering improved heat dissipation, better performance, and a tidier, more reliable system.
INNOVATIVE ARM DESIGN
Each arm is designed with an 8° inversion and a 3° inclination, making the aircraft more stable when rolling and pitching, yet more flexible when rotating.
Frame Arm Length386mm
Frame Arm Weight
(Including Motor, ESC, Propeller )325g
Center Frame Diameter337mm
Center Frame Weight (With Landing Gear Mounting Base, Servos)1520g
Landing Gear Size460mm(Length)×511mm(Width)×305mm(Height)
Weight(With Cooling Fan)158g
Working Voltage6S LiPo
Signal Frequency30Hz ~ 450Hz
Drive PWM Frequency8KHz
Foldable Propeller (1552/1552R)
MaterialHigh strength performance engineered plastics
Takeoff Weight6.0Kg ~ 11.0Kg
Power BatteryLiPo (6S,10000mAh~20000mAh,15C(Min))
Max Power Consumption4000W
Hover Power Consumption1500W (@9.5Kg Takeoff Weight)
Hover Time15min (@15000mAh & 9.5Kg Takeoff Weight)
Working Environment Temperature-10 °C ~ +40 °C
Gain Value Settings
For A2 Flight ControllerBasic: Roll 120%, Pitch 120%, Yaw 120%
Attitude: Roll 170%, Pitch 170%, Vertical 120%
For WooKong-M Flight ControllerBasic: Roll 130%, Pitch 130%, Yaw 120%
Attitude: Roll 180%, Pitch 180%, Vertical 120%
- LARGE CARRYING CAPACITY, STRONG AND STABLE
More from this collection