Antena de 50 MHz de Radar Systems para Zond Aero LF GPR
Antena de 50 MHz de Radar Systems para Zond Aero LF GPR

Antena de 50 MHz de Radar Systems para Zond Aero LF GPR

IS-ACCS

El fabricante no permite publicar el precio. Solicite un presupuesto:

The Radar Systems 50MHz Dipole Antenna Set is the purpose-built low-frequency antenna solution for the Zond Aero LF drone GPR system. Includes 2× 1.5m 50MHz dipoles, full mounting hardware, and custom non-conductive plastic legs for the DJI M600 Pro. Enables deep-penetration aerial GPR surveys for geological mapping, utility detection, and subsurface infrastructure assessment. Contact Maverick for pricing.

50MHz Deep-Penetration GPR. Drone-Mounted. Field-Ready.
The 50MHz dipole antenna set delivers the low-frequency penetration depth required for geological mapping, deep utility detection, void identification, and subsurface infrastructure assessment from drone platforms. Paired with the Zond Aero LF GPR system, the 50MHz antenna enables aerial surveys of targets that higher-frequency systems cannot reach — covering more ground, faster, with the safety and efficiency of drone-based data collection.

Complete Mounting Hardware Included. The set includes a plastic mounting rod, three Type 1 clamps (rod to Aero LF), five Type 2 clamps (rod to dipole), and plastic dipole caps — providing everything needed to mount the 50MHz antenna array to the Zond Aero LF system without additional hardware sourcing.

Custom Non-Conductive Legs for DJI M600 Pro. GPR operation requires non-conductive drone landing gear — standard carbon-fiber legs are conductive and must be replaced. This set includes custom plastic skids for the DJI M600 Pro. For other drone platforms, custom legs without M600 attachments are available on request.

Aerial GPR for Deep Subsurface Applications. The Zond Aero LF + 50MHz antenna combination enables drone-based GPR surveys for geological mapping, deep utility and void detection, permafrost assessment, and subsurface infrastructure inspection — covering large areas efficiently and safely from the air.

Learn More +

Conjunto de dipolos de 50 MHz para Sistemas de radar Zond Aero LF GPR.

El conjunto incluye:

  • 2 dipolos de 50 MHz (1,5 m de largo) para Zond Aero LF
  • 1x varilla de plástico
  • 3x Abrazadera tipo 1 (entre la varilla y Aero LF)
  • 5x Abrazadera tipo 2 (entre varilla y dipolo)
  • 2x Tapa de plástico para dipolo
  • 2x Patines personalizados para dron DJI M600 Pro

Nota sobre las patas del dron:

Las patas de los drones deben estar hechas de materiales no conductores. La fibra de carbono utilizada en las patas de la mayoría de los drones es conductora, por lo que las patas estándar deben sustituirse por patas de plástico personalizadas. Para drones que no sean el DJI M600, en lugar de patas listas para usar, podemos suministrar patas sin accesorios para el M600 para una rápida adaptación. Contáctanos para más detalles.


Visto recientemente